Omron

กล้องตรวจจับคุณภาพการผลิต Omron

กล้องตรวจจับคุณภาพบนตัวผลิตภัณฑ์ มีเทคโนโลยีที่สร้างขึ้นเพื่อการระบุข้อบกพร่องและความผิดปกติบนพื้นผิว ทั้งยังสามารถวัดรูปทรง ขนาด เพื่อประเมินการวางผิดแนวที่ตั้งไว้อีกด้วย

กล้องตรวจจับคุณภาพการผลิต Omron

Easy to install into machines

Camera with built-in light

The all-in-one camera including the light and lens can be easily integrated into almost any machine.
* The FQ2 Smart Cameras are also available.

High-power lighting

The sensor has a built-in high-power light capable of evenly lighting across a wide field of view.
This provides sufficient lighting even when the enclosed polarizing filter is used.

Adjustable lens

The focus of the lens can be adjusted to take clear images for the specific field of view and installation distance you need.

Sensor Controller SeriesFH-3000 series
TypeHigh-speed Controller (4 cores)
Sensor Controller ModelFH-3050FH-3050-10FH-3050-20
Controller TypeBOX type
Parallel IONPN/PNP (common)
Main
Functions
Operation
Mode
StandardYes
Double Speed Multi-inputYes
Non-stop adjustment modeYes
Multi-line random-trigger modeYes (Maximum 8 lines)
Parallel ProcessingYes
Number of Connectable Camera248
Supported
Camera
FH-S series cameraAll of the FH-S series cameras
are connectable.
All of the FH-S
series cameras
are connectable. *1
FZ-S series cameraAll of the FZ-S series cameras are connectable.
Camera I/FOMRON I/F
Possible Number of Captured ImagesRefer to catalog.
Possible Number of Logging Images to Sensor Controller
Possible Number of Scenes128
Operating
on UI
USB MouseYes (wired USB and driver is unnecessary type)
Touch PanelYes (RS-232C/USB connection: FH-MT12)
SetupCreate the processing flow using Flow editing.
LanguageJapanese, English, Simplified Chinese, Traditional Chinese, Korean, German, French, Spanish, Italian
External
Interface
Serial CommunicationRS-232C × 1
Ethernet
Communication
ProtocolNon-procedure (TCP/UDP)
I/F1000BASE-T × 11000BASE-T × 2
EtherNet/IP CommunicationEthernet port (transmission rate: 1Gbps)
EtherCAT CommunicationYes (slave)
Parallel I/O• 12 inputs/31 outputs:
• Use 1 Line.
• Operation mode: Except Multi-line random-trigger mode.
• 17 inputs/37 outputs:
• Use 2 Lines.
• Operation mode: Multi-line random-trigger mode.
• 14 inputs/29 outputs:
• Use 3 to 4 Lines.
• Operation mode: Multi-line random-trigger mode.
• 19 inputs/34 outputs:
• Use 5 to 8 Lines.
• Operation mode: Multi-line random-trigger mode.
Encoder InterfaceInput voltage: 5 V ± 5%
Signal: RS-422A LineDriver Level
Phase A/B/Z: 1 MHz
Monitor InterfaceDVI-I output (Analog RGB & DVI-D single link) × 1
USB I/FUSB2.0 host × 4 (BUS Power: Port5 V/0.5 A)
SD Card I/FSDHC × 1
Indicator
Lamps
MainPOWER: Green
ERROR: Red
RUN: Green
ACCESS: Yellow
EthernetNET RUN: Green
NET LINK
ACT: Yellow
NET RUN1: Green
NET LINK ACK1: Yellow
NET RUN2: Green
NET LINK ACK2: Yellow
SD CardSD POWER: Green
SD BUSY: Yellow
EtherCATEtherCAT RUN LED: Green
EtherCAT LINK/ACT IN LED: Green
EtherCAT LINK/ACT OUT LED: Green
EtherCAT ERR LED: Red
Power-supply voltage20.4 VDC to 26.4 VDC
Current
consumption
When connected
to a
Controller
Connected to 2 cameras5.0 A max.5.4 A max.6.4 A max.
Connected to 4 cameras---7.0 A max.8.1 A max.
Connected to 8 cameras------11.5 A max.
When not
connected
to Controller
Connected to 2 cameras4.1 A max.4.2 A max.5.2 A max.
Connected to 4 cameras---4.8 A max.5.6 A max.
Connected to 8 cameras------6.8 A max.
Built-in FANYes
Usage
Environment
Ambient temperature rangeOperating: 0°C to 50°C
Storage: -20 to +65°C (with no icing or condensation)
Ambient humidity rangeOperating:35 to 85%RH
Storage: 35 to 85%RH (with no condensation)
Ambient atmosphereNo corrosive gases
Vibration toleranceOscillation frequency: 10 to 150 Hz
Half amplitude: 0.1 mm
Acceleration: 15 m/s2
Sweep time: 8 minute/count
Sweep count: 10
Vibration direction: up and down/front and behind/left and right
Shock resistanceImpact force: 150 m/s2
Test direction: up and down/front and behind/left and right
Noise
immunity
Fast Transient
Burst
• DC power
Direct infusion: 2kV, Pulse rising: 5ns, Pulse width: 50ns,
Burst continuation time: 15ms/0.75ms, Period: 300ms, Application time: 1 min
• I/O line
Direct infusion: 1kV, Pulse rising: 5ns, Pulse width: 50ns,
Burst continuation time: 15ms/0.75ms, Period: 300ms, Application time: 1 min
GroundingType D grounding (100 Ω or less grounding resistance) *2
External
Features
Dimensions190 mm × 115 mm × 182.5 mm
Note Height: Including the rubber feet at the base.
WeightApprox. 3.2 kgApprox. 3.4 kgApprox. 3.4 kg
Degree of protectionIEC60529 IP20
Case materialCover: zinc-plated steel plate
Side plate: aluminum (A6063)
AccessoriesInstruction Sheet (Japanese and English):
1, Instruction Installation Manual for FH series:1,
General Compliance Information and Instructions for EU:
1, Power source(FH-XCN): 1 (male),
Ferrite core for camera cable:
2(FH-3050, FH-1050), 4(FH-3050-10, FH-1050-10), 8(FH-3050-20, FH-1050-20)

Brochure Omron